Sontronics STC-3X Pack, Black Includes; STC-20 Microphone, Pop, Cable and Carry Bag


• Large-diaphragm condenser mic
• 3 polar patterns: omni, cardioid, figure-of-eight
• 3-stage pad and 3-stage filter
• Comes
with free popshield, shockmount, 5-metre XLR cable and zip-up pouch
• Clear mids and highs, solid low end
• Smooth rolloff in high frequencies
• Extremely versatile


The Sontronics STC-3X Pack, Black features a Sontronics STC-3X Condenser Microphone, spider-style shockmount and nylon-mesh popshield (with two spare elastics), a five-metre XLR cable and a zip-up, vinyl microphone carry pouch.
The Sontronics STC-3X is a new condenser microphone, replacing the STC-2X, and features three polar patterns – omni, cardioid and figure-of-eight – selectable using the switch on the rear of the microphone.
The STC-3X is suitable for recording male and female vocals, as well as acoustic instruments such as acoustic guitar and piano and percussion. The STC-3X’s warm tone makes it ideal for voiceover and podcast applications, while its omni pattern makes it perfect for use as an overhead mic and for recording ensembles.

Sontronics STC-3X Pack Features:

  • Large-diaphragm condenser microphone
  • Omni, cardioid and figure-of-eight polar patterns
  • 20Hz – 20kHz frequency response
  • 16mV/Pa ™ 2dB (0dB = 1V/Pa @ 1,000Hz) sensitivity
  • =200 Ohms impedance
  • 18dB (A-weighted) equivalent noise level
  • Maximum SPL: 120db (for 0.5% THD @ 1,000Hz)
  • Requires phantom power 48V ™ 4V
  • 3-pin XLR connection
  • Includes shockmount with pop shield, XLR cable and carry pouch


  • Male & female vocals
  • Broadcast & voiceover
  • Acoustic guitar
  • Guitar amps (use with care!)
  • Solo strings, woodwind & brass
  • Piano
  • Vocal and instrumental ensemble
  • Solo percussion & drumkit
  • Room & overhead miking



Polar patterns: Cardioid, omnidirectional, figure-of-eight
Filter: 3-stage (linear, 75Hz, 150Hz)
Pad: 3-stage (0dB, -10dB, -20dB)
Frequency response
: 20Hz – 20kHz
Sensitivity: 16mV/Pa -36dB ±2dB
(0dB = 1V/Pa @ 1,000Hz)
Impedance: ≤200 Ohms
Equivalent noise level: 18dB
Max SPL (for 0.5% THD @ 1kHz): 125dB
Power: Phantom power 48V required
Connector: 3-pin XLR (cable included)
Dimensions: 194 x 53 x 53mm
Weight: 618g (818g with shockmount)
Comes with: shockmount, 2 spare elastics, popshield, 5-metre XLR cable, zip-up microphone pouch

Additional information

Weight 10 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.